Latest revision as of 20:14, 2 September 2024

Introduction

This is an incomplete guide on installing NixOs, using flakes and home-manager.

Be sure to have an ISO image of NixOS, which can be obtained here: https://nixos.org/download/#nixos-iso.

Installation guide

Partitioning your disk

Boot the installation medium.
Open a terminal.
Wipe your disk: $ blkdiscard /dev/<installation disk>.
Create root and boot partitions:

Use parted

$ parted <installation disk>
(parted) mklabel gpt

Boot partition

(parted) mkpart
(parted) Partitoin name? boot
(parted) File system type? fat32
(parted) Start? 0%
(parted) End? 2GB
(parted) set 1 esp on
(parted) set 1 boot on

Root partition

(parted) mkpart
(parted) Partitoin name? root
(parted) File system type? btrfs
(parted) Start? 2GB
(parted) End? 100%
(parted) quit

Configure and mount partitions

$ mkfs.btrfs /dev/<root partition>
$ mkfs.vfat -F32 /dev/<boot partition>
$ mount /dev/<root partition> /mnt
$ mkdir /mnt/boot
$ mount /dev/<boot partition> /mnt/boot

Generate and edit config

$ sudo nixos-generate-config --root /mnt
Edit your configuration: $ nvim /mnt/etc/nixos/configuration.nix
Checkout your hardware config: $ nvim /mnt/etc/nixos/hardware-configuration.nix
Remember to add the following to configuration.nix so that grub works with EFI:

boot.loader.grub.enable = true;
boot.loader.grub.efiSupport = true;
boot.loader.grub.device = "nodev";
boot.loader.efi.canTouchEfiVariables = true;

Note: This is an example of my configuration: https://git.posixlycorrect.com/fabian/desktop_config

Install

$ sudo nixos-install
Set root password when prompted to do so.
Reboot your machine
Login as root and set a password for your user: $ passwd <username>
Logout and login as your user

Enable flakes and replace your config with your flake

Flake

$ mkdir nix
Create your $ vim flake.nix
$ nixos rebuidl switch

Home manager

$ nix repl .

home = homeConfigurations.<configuration name>
home.activationPackage

Copy the resulting path and do:
$ build <path>
./result/activate

@@ Line 2: / Line 2: @@
 = Introduction =
-This is a complete guide on installing NixOs, using flakes and home-manager.
+This is an incomplete guide on installing NixOs, using flakes and home-manager.
 Be sure to have an ISO image of NixOS, which can be obtained here: https://nixos.org/download/#nixos-iso.
@@ Line 8: / Line 8: @@
 = Installation guide =
 == Partitioning your disk ==
+# Boot the installation medium.
 # Open a terminal.
 # Wipe your disk: {{ic|$ blkdiscard /dev/<installation disk>}}.
@@ Line 54: / Line 55: @@
 boot.loader.efi.canTouchEfiVariables = true;
 </pre>
+{{note|This is an example of my configuration: https://git.posixlycorrect.com/fabian/desktop_config}}
 == Install ==